|
|
Crown Automotive Manual Transmission Shift Lever Kit - 5359835k.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distribuutor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. T176/t177 Manual Transmission;includes: Shift Lever, Spring, Boot, Retainer And Clamp;left Hand Drive
Manufacturer: Crown Automotive
ID: 5359835k
Category: Drivetrain , amp, Differential, gt, manual Transmissions Parts, gt, manual Trans Shift Lever Kit
SKU: Cro5359835k
|
|
|
Auto Meter Sport-comp Pc Voltmeter Gauge - 3683.
Keep Tabs On The Health And Output Of Your Vehicles Electrical System Safely And Accurately With Auto Meters Ultra Precise Digital Steppe Rmotor Voltmeter. With Precise Resolution And Ultra Smooth Needle Movement, This Gauge Operates Anywhere From 8-18 Volts On Negative Ground Electrical Systems. Peak Value Recall And A Configurable Warning Point Help You To Keep Your Eyes On The Task At Hand. A Direct Plug In Wiring Harnesses Included For Ease Of Installation. Voltmeter Gauge;8 - 18 Volts;incl. 8 Ft.. Wiring Harness;full Sweep
Manufacturer: Auto Meter
ID: 3683
Category: Performance Parts, gt, gauges, gt, voltmeter Gauge
SKU: Amg3683
|
|
|
Auto Meter Phantom Electric Pyrometer Gauge Kit - 5744.
Watching Your Precise Exhaust Temperature Can Mean The Difference Between Maximum Performance And Catastrophic Engine Damage. On High Output Diesel Or Forced Induction Applications, There Are Few Gauges That Are More Critical. Auto Meters Digital Stepper Motor Display Makes Viewing Your Exact Exhaust Temperature Effortless. The Included Type K Thermocouple Assures Maximum Accuracy And Minimum Response Time. There Is, Quite Simply, Not A Berter Measurement Of Your Exact Exhaust Gas Temperature Available Anywhere, For Any Price. A Variety Of Included Installation Options And Direct Plug In Harness Simplify Installation On Any Application. . Electric Pyrometer Gauge Kit;0 - 1600 Deg. F;street Series Incl. 8 Ft. Tubing Or Wiring Harness;type K Thermocouple;air-core Meter Movement
Manufacturer: Auto Meter
ID: 5744
Category: Performance Parts, gt, gauges, gt, gauge Set
SKU: Amg5744
|
|
|
Amp Powerstep Led Light Kit - 75131-01a.
Truck Owners - No Other Running Board, Tube Step Or Nerf Bar Be Able To Match The Ease Of Entry Of The Amp Research Power Step. Open The Door And This Full-length Running Board Automatically Deploys For Easy Stepping In And Out O Fthe Cab. Close The Doors And This Sure-footed Step Platform Retracts Safely Under The Truck With No Loss Of Ground Clearance. Black Anodized And Teflon Powder Coat
Manufacturer: Amp-research
ID: 75131-01a
Category: Side Steps , amp, Running Boards, gt, running Boards, gt, running Board Lamp Connector
SKU: Amp75131-01a
|
|
|
Arb Engine And Gearbox Skid Plate (gray Powdercoat) - 5450110.
As The First Solid Axle Model Vehicle Arb Engineers Tackled For Skid Plates, The Jeep Wrangler Jk Presented Many New Issues That Needed To Be Overcome. Among Those, The Skid Plates Panel Had To Mount In Such A Way That It Allowed Full Movement Of The Front Axle And All Of Its Locating Components During Suspension Cycling. Next It Had To Allow For The Many Different Suspension Systems And Aftermarket Control Arms Available On The Market For This Popular Vehicle. Being The Longest Skid Plate Panel Manufactured So Far, This Panel Is Designed To Virtually Cradle The Entire Engine Oil Pan On All Sides, Providing The Maximum Amount Of Protection While Still Allowing Access To The Engine Oil Drain Plug. Toward The Rear Of The Panel The Surface Area Was Kept As Narrow As Possible So As To Allow For The Fitment Of Aftermarket Long Arm Kits. To Support The Panel, A New Cross-member Has Been Developed That Bolts Between The Two Engine Mounts. Special Attention Had To Exist Paid To The Design To Allow The Front Suspension Control Arms To Travel Up Fully (under Suspension Compression) In An Area That Was Very Compact And Didn't Allow A Lot Of Freedom In Design. In Addition To Engine Oil Pan And Transmission Protection, The Jeep Also Has A Vulnerable Charcoal Canister (part Of The Vehiclee Missions System) That Hangs Low Towards The Rear Of The Vehicle For Which A Separate Skid Plate Panel Has Been Developed. 2 And 4-door Models;designed To Protect Vital Underbody Components Including Engine Oil Pan And Transmission;manufactured From Folded 3mm Laser Cut Steel;securely Bolted To The Vehicles Chassis Providing Outstanding Structural Integrity;all Steel Components Are Zinc Plated And Powdercoated In A Silver Textured Finish;eeasily Removed For Vehicle Servicing
Manufacturer: Arb 4x4 Accessories
ID: 5450110
Category: Armor , amp, Protection, gt, skid Plates
SKU: Arb5450110
|
|
|
Curt Manufacturing Class I 1.25 In. Receiver Hitch - 110573.
Class I Receivers Are Built With A Square Receiver Tube. Maximum 2.000 Lb. Gross Trailer Weight (gtw) Rating. Comes With A Gloss Black Powder Coat Finish. 2,000 Gtw, 200 Lb. Tw. Ball Mount Pin And Clip Are Included. Class I;incl. Std Ball Mount/pin/clip;rear;2000lbs. Gross Trailer Weight;200lbs. Tongue Weight
Manufacturer: Curt Manufacturing
ID: 110573
Category: Towing, gt, hitches, gt, trailer Hitch
SKU: Crt110573
|
|
|
Design Engineering Inc Boom Mat Sound Deadening Rear Side Window - 50151.
Boom Mat Acoustical Products Unique Ability To Filtering Sound Quality By Absorbing The Unwanted Noise And Sound Waves Drastically Improves The Enhancement Of Audio Sound Performance, Eliminating Both Road And Engine Noise While Also Dampening The Vibrations That Tunnel And Surround Audio Output. Boom Mat Acoustical Products Aid In Filtering The Distortion Caused By Audio Waves From Both Low And High Decibel Frequencies Or From Bass Vibrations, Road Rattle And Engine Noise Disrupts The Sound Waves We Would Rather Hear. 4-door Models;white;easy To Clean;peel And Stick Application;insulate Interior From Heat And Cold;1 Inch Thick Marine Grade Acoustic Foam;mold And Mildew Resistant;has Fabric Inside Over The Foam Insulation;durable For Extreme Off-roading;compliments Your Sound Deadening Headliner Kit
Manufacturer: Design Engineering Inc
ID: 050151
Category: Interior, gt, carpet Kits , amp, Sound Deadening, gt, sound Dampening Sheet
SKU: Dei050151
|
|
|
Fab Fours Rock Sliders (black) - Lj05-g1150-1.
Rocker Panel Protection For Your Jeep Lj. Integrated Tube And Formed Steel Construction Maximize Your Vehicles Impact Resistance In More Extreme Conditions. Semi-gloss Textured Black Powdercoat;double Wall Construction Provides Superior Structural Integrity;double Wall Protects Fasteners, Provides Smooth Surface To Slide Over Obstacles;precision Engineering/manufacturing For True Fit And Easy Installation
Manufacturer: Fab Fours
ID: Lj05-g1150-1
Category: Armor , amp, Protection, gt, rocker Protection, gt, rock Sliders And Guards
SKU: Ffilj05-g1150-1
|
|
|
Banks Power Sidewinder Intercooler - 25402.
The Intercooler Allows For Steady Power Output Even Under Extreme Ambient Temperatures. Cooler Charge Air Temperatures Allow For More Efficient Spark Timing Whether Your Cruising, Crawling, Or Running Full-throttle. 4.0l 6 Cylinder Engine;gain Up To 75% More Torque;horsepower Peak-to-peak Increases By Up To 71%;0-60 Mph Acceleration In 9.62 Seconds;works Best With Sidewinder Turbo System;includes All Required Fasteners, Brackets, Pre-formed Hoses And Sealed Power Harness For Easy Installation
Manufacturer: Banks Power
ID: 25402
Category: Performance Parts, gt, turbo , amp, Intercooler Upgrades, gt, turbocharger Intercooler
SKU: Gbe25402
|
|
|
Hedman Htc In Frame Single Outlet Exhaust Header (coated) - 99616.
Hedman Hedders Was The First Mmanufacturer To Introduce Advanced Aerospace Technology To The Hedder Industry. The Alloy Of Ceramic-metallic Composition Used By Hedman, Now Known As Htc (hi-tech Coating), Was And Still Is Considered The Very Best Thermal Coating Available For Your Hedders. Htc Is Bonded To Your Hedders With A Strength Factor Exceeding 10,000 Psi. This Durability Makes The Finish Resistant To Abrasion And Chipping. Oil And Grease Stains Can Be Removed With Polish Or Fine Steel Wool. Hedmans Htc Coating Is Guaranteed Against External Rust-through For A Full 5 Years. Together With Hedmans Lifetime Guarantee Against Defects In Workmanship, You Will Have Years Of Worry-free Hedder Ownership. Amc 232-258 6 Cylinder Engine;hi Tech Htc Coated;manual Transmission Only;will Not Work With Factory Exhaust;custom Exhaust Required;state Legal: 49 State;in California, This Part May Not Be Used Upon A Highway And May Only Be Used For Race Purposes
Manufacturer: Hedman
ID: 99616
Category: Performance Parts, gt, exhaust Systems, Headers, Pipes And Hardware, gt, exhauet Headers
SKU: Hed99616
|
|
|
Icon Suspension 2.5 Series Rear Shock - 27781p.
Icon Vehicle Dynamics 2.5 Inch Diameter Rear Remote Reservoir Shocks For The 10+ Grand Cherokee Wk2 Will Offer Additional Performance And Ride Quality Over Stock. Engineered To Comply With 0-1 Inch Of Rear Lift, These Shocks Are Also Tuned To Offer A More Confidence-inspiring Ride Characteristic Both On And Off Road. Please Note : Rear Shocks Use Factory Upper Hardware. If You Do Not Have The Larger Of The Two Available Stock Shocks Equipped On This Vehicle You Will Need To Purchase This From The Dealer. 2.5 Inch Diameter Shock Body;7/8 Inch Shock Shaft;increased Wheel Travel;100% Re-buildable And Re-valvable;100% Made In The U.s.a.
Manufacturer: Icon Suspension
ID: 27781p
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Ico27781p
|
|
|
Icon Suspension V.s. 2.0 Aluminum Series Front Shock - 26519.
Icon Vehicle Specific (v.s.) 2.0 Aluminum Series Shock Absorbers Are The Ultimate In Cost Effective Upgrades, Specifically Tailored By Icon Engineers For Your Application. The V.s. 2.0 Aluminum Series Shocks Are A High Quality Uppgrade For The Everyday Street Driver And Weekend Warrior Looking For Improved On And Off Road Performance. Like All Icon Shock Absorbers, V.s. 2.0 Aluminum Series Shocks Are 100% Rebuildable And 100% Revalveable. As With All Icon Vehicle Dynamics Shocks, These Jeep Jk 2-3 Lift Front 2.0 Aluminum Series Shocks Are Valved Specifically For The Vehicle. They Offer Incredible Ride Disposition And Performance In Any Terrain. The Shocks Come Complete With Top Mounting Hardware And Bushings (the Stock Bolt Is Utilized For The Bottom). 2 And 4-door Models;front Shock For 2-3 Inch Of Lift;nitrogen Charged Monotube Design With Internal Reservoir;premium Grade 5wt Shock Oil For Consistent Damping Along Wide;5/8 Inch Polished Nitro Steel Shaft;6061 Aluminum Rod End;polyurethane Bushings And Zinc Plated Sleeves For Oe Factory Type 6063 Anodized Aluminum Body;100% Rebuildable And Revalveable;buna Top Out Full Glass For Noise Free Operation;sold Individually;made In The U.s.a
Manufacturer: Icon Suspension
ID: 26519
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Ico26519
|
|
|
Omix-ada Dana 30 Cj Wide Trac Driver Side Inner 27 Spline Front Axle Shaft - 16523.07.
For Use With Wide Trac Axle. Note: Limited Availability. New Style Axle Shaft Can Be Used For 1972-76 Drum Brakes With #36364 Dust Shield And #38128 Large V-ring Seal Used In Place Of Original Brake Dust Shield And Seal. Dana 30;driver Side;for Use With Wide Trac Axle
Manufacturer: Omix-ada
ID: 16523.07
Category: Replacement Drivetrain Parts, gt, replacement Axle Parts, gt, yj Wrangler Model 30 Front Axle
SKU: Oai16523.07
|
|
|
Omix-ada Windshield Wiper Switch - 17236.06.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. With Intermittent Wipers;windshield Wiper Switch
Manufacturer: Omix-ada
ID: 17236.06
Category: Replacement Exterior Parts, gt, replacement Windshield And Wiper Parts, gt, tj Wrangler Wiper Parts
SKU: Oai17236.06
|
|
|
Omix-ada Fuel And Intake Manifold Seal - 17445.19.
Complete Kit Of All Fuel And Intake Manifold Seals For The Pentastar 3.6l Engine. 2 And 4-door Models;3.6l 6 Cylinder Engine
Manufacturer: Omix-ada
ID: 17445.19
Category: Performance Parts, gt, engine Gaskets , amp, Master Rebuild Kits, gt, intake Manifold Gasket Set
SKU: Oai17445.19
|
|
|
Rcv Axles Ultimate Dana 44 30 Spline Front Cv Axle Set For Rubicon With 300m Shafts - Cvj44 30 Spline Front - Cvj44-jk-300m.
Rcv Performance Ultimate Cv Axles Simply Replace Your Jeep Jks Weak Dana 44 U-joint Axle Shafts With A High-strength Constant Velocity Design. Tests Prove Ultimate Cv Axles To Be Twice As Strong As Oem Jeep Jk Shafts, And They're Just As Tough At A Straight Angle As They Are At Extreme Angles - Where U-joints Are Weakest. We Have Gone A Step Further By Upgrading The Inner Shafts To 300m, Which Provides An Even Greater Tolerance To Stress. Ultimate Cv Axles Also Eliminate U-joint Binding To Allow Smooth Transfer Power To The Ground. Even If You Have Big Tires And Big Power There Are No Worries. Ultimate Cv Axles Are Low Maintenance And Operate With A Smoothness You Can Feel - Whether Off Road Or On The Street. And We Back It All With A No Questions Asked Limited Lifetime Warranty. 2 And 4-door Models;dana 44 Front Axle With 300m Inner Shafts;rubicon Models Only;inner Spline 30;outer Spline 32;includes Driver And Passenger Side Cv Axle Shafts And Sst Seals And Installation Tool;includes Installation Instructions, Synthetic Moly Grease, And Installation Hardware;black Oxiide Coating Is Standard;eliminates U-joint Binding To Allow Smooth Transfer Power To The Ground;no Questions Asked Limited Lifetime Warrany - Void If Running Over 40 Inch Tires
Manufacturer: Rcv Axles
ID: Cvj44-jk-300m
Category: , gt, gt, axle Shaft Assembly
SKU: Rcvcvj44-jk-300m
|
|
|
Rock Krwwler 3.5 Inch Max Travel System - Stage 2 - Rkstj35mt-s2.
Rock Krawler Suspension Is Tue Premier Jeep Suspension Manufacturer. Being A True Made In The U.s.a. Company And Take Pride In All Of The Components That Leave Their Doors. They Are Also The North Easts Premier Up-fitter For Jeeps. Over Their Many Years In Business, They Have Built Many Show Quality Jeeps And Also Purpose Built Competition Rigs. Complete Bolt On System;pro Front Sway Bar Disconnects;triple Rate Coil Springs;allows 33 Inch Tire With Stock Fenders;includes Emulsion Shocks With Reservior;front Control Arms;rear Upper Arms;upgradable;lifetime Warranty
Manufacturer: Rock Krawler
ID: Tj35mt-s2
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Rkstj35mt-s2
|
|
|
Rampage Complete Soft Top (spice) - 68517.
The Tj Complete Soft Top Kit Includes The Fabric Top, 35% Tinted Vinyl Windows, New Framework Bows, Hardware And All Accessories Necessary For A New Top Installation. It Comes With Easy To Follow Instructions And Is Packaged N A Convenient, Durable Storage Bag. Rampage Has Improved The Factory Top With The Following Additions. Top Includes A Reengineered Bow System That Is Easy To Use And Folds Down When Top Is Not In Use, Soft Top Disconnects, Convenient Interior Zippered Storage Pockets, Soft Top Storage Bag, Rear Tailgate Bar Has A Custom Tonneau For Hiding Valuables And Sealing The Top And It Includes A Free Off-road Organizer. Top Has A 2 Year Limited Warranty. Spice;with Tinted Windows;with Upper Doorskins;includes All Framework, Top And Windows;zipper Storage Pockets;self Correcting Heavy-duty Zippers;fade Resistant Marine Grade Material
Manufacturer: Rampage
ID: 68517
Category: Tops , amp, Accessories, gt, jeep Soft Tops
SKU: Rpp68517
|
|
|
Rugged Ridge Contoured Locking Console (spice) - 13101.37.
The Contoured Locking Console From Steel Horse Looks Great And Is Amazingly Functional. The Curved Design With Padded Armrest And Carpet-lined Storage Area Will Enhance Any Interior. Includes Two Built-in Cup Holders, A Cargo Net For Extra Storage And A Locking Compartment, This Console Fits In The 1976-95 Jeep Cj Or Yj Wrangler. Easy To Install With Minimal Drilling. Comes Complete With A Leveling Bracket. Measures: 23-1/2l X 8-1/2w X 12-1/2h. Spice;fully Lined Locking Storage Area;6 Can Cooler;built-in Cup Holders;padded Arm Rest;front Cargo Net
Manufacturer: Rugged Ridge
ID: 13101.37
Category: Interior, gt, storage , amp, Organizers, gt, center Console
SKU: Rug13101.37
|
|
|
Smittybilt Front Super Seat Recliner (spice) - 49517.
The Ultimate In Comfort And Style! Plush Vinyl Or Full Fabric Covering And Contoured Bucket Seats Assure Total Comfort. Unlimited Recline Positions And Adjustable Headrest Keeps You Alert, Yet Comfortable. Mounts To Your Factory Seat Slider And Bracket. Available With Leather Grain Vinyl Or Fabric Seating Surfaces. Seat Adapters Are Required For Installation In 1997-02 Tj Wranglers. Spice Denim Vinyl;contoured Bucket Seat;unlimited Recline Positions With Adjustable Headrest;1997 And Newer Models Require Adapter Brackets;hardware Not Included
Manufacturer: Smittybilt
ID: 49517
Category: Interior, gt, seating, gt, seats
SKU: S/b49517
|
|
|
Teraflex 4 Inch Lift Kit With 9550 Shocks And Track Bar - 1251400.
The Kit With Shocks Includes 4 Extended Length Coils, Shocks, Front Sway Bar Disconnects, Rear Track Bar Bracket, Bump Stops, And All Necessary Hardware. This Kit Will Allow The Use Of Up To A 37 Tire (aftermarket Wheels With 4.5 Backspacing Or Less Are Recommended). Driveline Modifications Are Required. 4-door Models;includes Shocks;4 Inch Extended Length Coils;front Sway Bar Disconnects;rear Track Bar Bracket;bump Stops;all Of The Necessary Hardware;max Tire Size: 37x12.50
Manufacturer: Teraflex
ID: 1251400
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Ter1251400
|
|
|
Teraflex Scout Dana 300 Transfer Case Low Range Gear Set - 2103000.
Scout Owners Can Purchase The Low300sc For 1980 Scouts (manual Transmissions). The Low300scauto Is Designed For Automatic Transmissions. The Scout Kit Requires Some Internal Case Grinding. Overhaul Kit: The Tc300 Overhaul Kit Is Available For Anyone Needing The Bearings And Seals To Completely Overhaul The Dana 300 T-case. Dana 300;includes Replacement Gears;replacement Shift Rail;gasket;seal Kit;shims
Manufacturer: Teraflex
ID: 2103000
Category: Drivetrain , amp, Differential, gt, transfer Case Adapters , amp, Upgrades, gt, transfer Case Crawl Box And Low Gear Set
SKU: Ter2103000
|
|
|
Warrior Front Spring Brackets - 399.
Finally, There Is A Leaf Spring Shackle Frame Bracket That Can Handle The Abuse! Die-formed And Jig-welded From 1/4 Inch Steel, These Brackets Will Not Unwind Thanks To Reinforced Gussets. Some Bracket Kits Include Urethane Bushings And Greaseable Bolts As Well. Front Frame Bracket;with 2 Inch Spring Bushings And Greaseable Bolts
Manufacturer: Warrior
ID: 399
Category: Suspension And Shocks, gt, suspension Components, gt, leaf Spring Shackle
SKU: W/i399
|
|
|
Warrior Jk Wrangler 10 Inch Front Tube Fender Flares (paintable) - 7314.
Designed To Replace The Original Flares, Tube Flares Mount Into Existing Fender Wells With Minimal Or No Drilling. Constructed Of 1.5 Steel Tubing, These Beefy Frames Are A Perfect Compliment To Our Tube Doors. The Outer Mounting And Frame Of The Flare Comes In A Black Powder Coated Finish While The Flares Top Plate Comes In Three Finishes To Match Other Warrior Body Armor; Polished Diamond Plate, Black Powder Coated Diamond Plate And Smooth Black Steel. Our Steel Topped Applications Are Available In An Uncoated Bare Steel Option For Paint Matching Purposes. All Fender Flares Are Sold In Front And Rear Pairs. An Optional Led Signal Light Can Be Incorporated Into The Leading Edge Of The Front Flare And Comes Complete With Wiring Harness For Easy Installation. Light Kits Are Sold Separately. Steel Versions Have Welded On Top Plates, While Diamond Plate Aluminum Versions Are Pop-riveted Into Place. Noticeably The Steel Will Have A Much More Precise And Solid Fitment. 2 And 4-door Models;diamond Plate;1-1/2 Inch Tubing;sold As A Pair
Manufacturer: Warrior
ID: 7314
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, tube Fenders
SKU: W/i7314
|
|
|
Westin Wade Sure Fit Cargo Mat - 72-137033.
Wade Sure Fit Cargo Mat; Tan; Protects Cargo Area Rigid Core And Tactile Surface Made Of Molded Rubberized Copolymer Made In The Usa Limited Lifetime Warranty
Manufacturer: Westin
ID: 72-137033
Category: Interior, gt, floor Mats , amp, Cargo Liners, gt, cargo Area Liners
SKU: Wes72-137033
|
|
|