|
|
Beams 3-point Shoulder Harness Belt In In Blue - F0721-637405.
Keep Yourself Snug And Safe While Driving Or Trail Riding With These Quality Replacement Seat Belts. If Your Seat Belts Are Worn, Frayed Or Damaged, They Cannot Provide Adequate Protection For You Or Your Family. Our Seat Belts Meet Current Federal Motor Vehicle Safety Standards (fmvss). All Belts Include Mounting Hardware. *6 Extension Bracket Must Also Be Purchased, Part #oai13202.03. Each Sold Separately. Also Available In Black (01), Tan(04), Gray(09) And Red(73). Blue;retractable;hardware Included;meets Federal Motor Vehicle Safety Standards;made In The U.s.a
Manufacturer: Beams Industries Inc
ID: F0721-637405
Category: Interior, gt, seating, gt, seat Beelts And Harnesses
SKU: Biif0721-637405
|
|
|
Genuine Packages Backup Camera With Phone Cradle - Audjk11164.
Creates Its Own Wifi Hotspot And Includes A Patent Pending Magnetic Adjustable Mount. Portable Capabilities Allow Camera To Be Positioned Almost Anywhere And Carried From Vehicle To Vehicle When Needed To Help With Trailer Hook Up Or Parking And Can Assist With Rock Crawling (wheel Well Location) Or Other Outdoor Vehicle Activities Simply By Locating On Any Metal Mount Points. Small Overall Size Allows Easy Storage In Vehicle. Use With Existing Smart Phones, Tablets Or Pads With Simple App Based Setup. Uses Hi-tension (real Earth Element) Magnetic Feet For Firm Tailgate Or Body Panel Attachment That Sticks And Stays. Special Case Is Push To Open Or Close For Protection Of Cameras Lens. Will Operate Up To 4-6 Hours On Charge Using Internal Lithium Battery. Standard Video Function Or Take Screen Shots Via The Installed App. Includes Storage Bag, Charger, And Stand To Support Phone On Vehicle Dashboard. Transform Your Factory Dash Into A Custom Holder For Your Glasses, Small Items And Gps Or Phone Within Easy And Safe Access. Takes Just Minutes To Install. Comes Complete With Phone/gps Cradle Mount. You Will Not Ever Have To Worry About Blocking Your Airbags Or Your Items Sliding Across The Dash. Because It Is Mounted To The Dash And Not With A Dangerous Windshield Suction Cup, You Will Be 50 State Legal. 2 And 4-door Models;easy To Install;factory Includes Storage Bag, Charger And Stand To Support Phone On Dashboard;hi-tension Magnetic Feet Allows The Camera To Be Mounted Anywhere;up To 200 Ft Wifi Range;phone And Tablet Sold Separately
Manufacturer: Genuine Packages
ID: Audjk11164
Category: Interior, gt, audio , amp, Video, gt, audio Packages
SKU: Addaudjk11164
|
|
|
Bushwacker Jeep Tj Wrangler Rear Fender Flares 10056-07 - Flat Style.
Be Ready For Anything Equip Your Jeep Wrangler With Bushwacker Flat Style Fender Flares. They Are The First And Only Flat Style Flares Made To Absorb Impact, Using Our Proprietary Dura-flex 2000 Tpo The Thickest, Most Flexible Material Available. Flat Style Fender Flares Maximize Your Tire Coverage And Wheel Articulation For Severe Off-road Use. Yet They Are Carefully Engineered To Install With A Minimum Of Extra Tools And Bodywork (see The Installation Guide For Your Specific Vehicle For Details). For Example, Our Mounting Brackets Bolt Straight Onto Your Jeep For Added Strength And Simpler Fitting. Our Design Integrates Neatly With The Factory Rocker Guards, And Incorporates Dot-compliant Led Side Marker Lights And Fully Molded Wheel Well Protection. The Flares Are 100% Uv Protected, Too, To Stop Chalking In Its Tracks. If You Want The Look - And The Real-woorld Performance - That Best Fits An American Icon, Nothing Goes With Your Jeep Better Than Bushwacker Flat Style Fender Flares. Pair Of Rear Flares Only;oem Textured Black Finish;no Drill Installation;adds Up To 6 Inch Of Tire Coverage From Debris;made Of Dura-flex 2000 Tpo Material For Maximum Durability And Flexibility;made In The U.s.a;limited Lifetime Warranty
Manufacturer: Bushwacker
ID: 10056-07
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, fenders , amp, Flares, gt, jeep Fender Flares
SKU: B/w10056-07
|
|
|
Crown Automotive Power Steering Pressure Hose - 52128940af.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, They Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Pressure Hose With Brackets
Manufacturer: Crown Automotive
ID: 52128940af
Category: Replacement Brakes, Steering And Suspension Parts, gt, replacement Suspension Parts, gt, tj Wrangler Suspension And Steering
SKU: Cro5212840af
|
|
|
Crown Automotive Wide Fender Flare Kit - 55254918k76.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinue Ditems, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Flat Black;7 Inch Wide Flares;6 Piece Set
Manufacturer: Crown Automotive
ID: 55254918k76
Category: Replacement Exterior Parts, gt, replacement Body Parts, gt, cj Body Parts
SKU: Cro55254918k76
|
|
|
Crown Automotive Headlamp Assembly - 57010170ae.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Without Fog Lamps And Without Hheadlamp Leveling System;passenger Side Assembly
Manufacturer: Crown Automotive
ID: 57010170ae
Category: Replacement Exterior Parts, gt, replacement Lighting Parts, gt, jk Wrangler Lighting
SKU: Cro57010170ae
|
|
|
Crown Automotive Brake Master Cylinder - 68091278ab.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. 2 And 4-door Mo Dels;with 13 Inch Diameter Front Rotors
Manufacturer: Crown Automotive
ID: 68091278ab
Category: Replacement Brakes, Steering And Suspension Parts, gt, replacement Brake Parts, gt, xj Cherokee Brake Parts
SKU: Cro68091278ab
|
|
|
Crown Automotive Dana 60 Differential Gear Set - J8129241.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Standard;for Dana 60 Rear Axle
Manufacturer: Crown Automotive
ID: J8129241
Category: , gt, gt, jk Wrangler Model 35 Rear Axle
SKU: Croj8129241
|
|
|
Currie Heavy Duty Spring Plates - Ce-9031e.
Curries Spring Plates Are Built To Withstand The Most Rugged Off Roadstead Abuse. They Have A Built-on Skid Plate To Protect U-bolts. The Top Plate Is 5/16 Steel And The Bottom (skid Plate) Is Stamped Out Of 1/4 Steel. These Heavy Duty Universal Spring Plates Are Designed To Be Used With 2 Wide Springs And Come With Bolt On, Replaceable Shock Mount. Price Listed Is For A Pair Of Plates. Hardware Kit;finish: Raw Steel;sold As A Pair
Manufacturer: Currie
ID: Ce-9031e
Category: Suspension And Shocks, gt, suspension Components, gt, leaf Spring Plate
SKU: Curce-9031e
|
|
|
Currie Rear Coil Spring Retainer Kit - Ce-9807rrk.
Coil Spring Retaining Kit For The Rear Of The Jk Includes Everything To Clamp The Top Of The Coil Spring To The Frame And The Bottom Of The Spring To The Axle Housing. Sold As A Set For Both Sides - Rear Only! 2 And 4-door Models;prevents Springs From Popping Out While Off-road;clamps Springs To Frame And Housing
Manufacturer: Currie
ID: Ce-9807rrk
Category: Suspension And Shocks, gt, suspension Components, gt, coil Spring Retainer
SKU: Curce-9807rrk
|
|
|
Fab Fours Full Metal Jacket Full Width Winch Front Bumper Without Grill Guard (black) - Jk07-b1857-1.
Building On Their Reputation For The Highest Quality And Design In The Truck Market, The Fab Fours' Premium Winch Bumper Focuses On Strength And Durability. This Bumper Is Designed To Be The Ultimate In Functionally-stylish Front End Protection While Also Providing More Tire Clearance To Eliminate Rubbing. Key Features Include The Integrated Fog And Turn Lights, Air Ducts, D-ring Mounts And Ability To Accommodate Up To 10,000 Lb. Winches. Available Wit H A Guard Or Base Bumper. Black Powder Coat;designed For Maximum Tire Clearance; Optional Winch Plate (jpwp-1) Or Optional Winch Modifier (jk07-b1859-1); Accepts Up To 10,000 Lb. Winches Or Smaller; Accepts The Warn Power Plant And Zeon Winches; Light Cut Outs For Factory Fog Lights; Optional Cutouts For 2x2 Rigid Industries Surface Mount ?dually? Lights (not Included); 3/4 D-ring Mounts; 2 Stage Matte Black Powder Coat Or Bare Steel (-b Instead Of -1); 3/16 Steel Construction; 100% Made In The Usa
Manufacturer: Fab Fours
ID: Jk07-b1857-1
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: Ffijk07-b1857-1
|
|
|
King Shocks Wide Range Compression Adjuster Shock Kit - 25001-180a.
King Oem Performance Kit Custom Tuned To Provide Your Jeep With Unparalleled Levels Of Performance And Ride Quality. Each Kit Has Been Subjected To Punishing Real World Testing To Develop The Optimal Damping Curve And Spring Rate For Your Vehicle. Easy Bolt-on Installation For Stock Height Or Custom Kits For Trucks Running Lifted Aftermarket Suspensions. 2 And 4-door Models;with 0-2 Inch Lift Kits;adjustable Front Shocks;simple Bolt On Installation;large Diameter Micro-polished Shafts;aeroquip High Presure Hoses On Remote Reservoirs;6063 Aluminum Alloy Reservoirs Dissipate Heat Quickly;preciesly Adjust Compression With The Twist Of A Billet Knob;20 Positive Clicks Of Adjustment;sold As A Pair
Manufacturer: King Shocks
ID: 25001-180a
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Kst25001-180a
|
|
|
Mastertop Tonneau Cover (spice Denim) - 14503137.
Complete The Summer Accessory Package With A Mastertop Tonneau Cover. These Custom Rear Vehicle Covers Protect Your Belongings From The Weather And Keep Your Valuables Out Of Sight From Prying Eyes. Constructed Of Durable Original Equipment Approved Fabric, Each Tonneau Is Custom Fit For Your Jeep And Features Sport Bar ?sleeves? That Secure Around The Sport Bar. Though Not Completely Waterproof, These Durable Rear Vehicle Covers Attach To Your Factory Belt Rail/tailgate Bar System And Fits Over Your Soft Top Hardware On 87-06 Wrangler Models (w Ill Not Fit 87-06 Wrangler Hardtop Only Vehicles). Each Mastertop Tonneau Incorporates A Front Facing Zipper Attachment For Use With A Mastertop Wind Stopper To Create The Ultimate Summer Soft Goods Combo. All Mastertop Black Diamond Tonneau Covers Use Up-graded 28 Oz Sail Cloth Fabric For The Ultimate In Durability And Great Looks. This Is A Mastertop Exclusive Feature Found In No Other Aftermarket Summer Soft Top! Why Mastertop Tonneau Covers? In This Highly Competitive Category, Other Manufacturers Have Reduced The Quality Of The Fabric And Designs To The Point Where It Is Almost Impossible To Find A Summer Accessory Made With The Original Equipment Approved Fabric. In An Effort To Reduce Cost (and Unfortunately, Quality), Manufacturers Have All Gone To An Imported Very Low Grade Of Fabric. This Inferior Fabric Does Not Match Your Soft Top, Rips Easier And Has Inconsistent Color And Textures. At Mastertop We Continue To Provide The Products With The Quality You Have Come To Expect From A Premium Manufacturer. We Use Only Original Equipment Approved Fabrics In Our Summer Soft Goods (excluding Sun Stop Mesh Products) To Ensure You Only Get The Best Product Available. Spice Denim;custom Fit ?sleeves? Fit Around Your Sport Bar;designed To Easily Attach To A Mastertop Wind Stopper With An Easy Attach Zipper;protects Cargo From Wandering Eyes And Light Showers;not Completely Waterproof;3 Year Limited Warranty
Manufacturer: Mastertop
ID: 14503137
Category: Tops , amp, Accessories, gt, windjammers, Wind Stoppers, Dusters , amp, Covers
SKU: Mas14503137
|
|
|
Omix-ada Regular Clutch Kit - 16901.07.
Kit Includes: Pressure Plate, Clutch Disc And Throw Out Bearing. 6 Or 8 Cylinder Engines;10-1/2 Inch Clutch;regular Clutch Kit
Manufacturer: Omix-ada
ID: 16901.07
Category: Replacement Drivetrain Parts, gt, replacement Clutch Parts, gt, sj Full Size Clutch Parts
SKU: Oai16901.07
|
|
|
Omix-ada Polyurethane Fuel Tank - 17722.08.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 225 6 Cylinder Engine;under Passenger Seat;polyurethane Fuel Tank
Manufacturer: Omix-ada
ID: 17722.08
Category: Performance Parts, gt, fuel Tanks , amp, Fuel Tank Hardware, gt, fuel Tank
SKU: Oai17722.08
|
|
|
Go Rhino Rb10 Running Boards With Drop Steps (black) - 6349264810t.
Heavy Duty Rb10 Running Boards Are Built Tough And Can Protect Your Truck From All Of The Punishment From The Road And Environment. This Combo Package Includes A Pair Of Rb10 Drop Steps For Easier Access Into The Vehicle. 2-door Models;textured Black Powdercoat;raptor Style Design;mounting Brackets Included;drop Step Surface 4 Inch Below Main Board For Easier Entry
Manufacturer: Go Rhino
ID: 6349264810t
Category: Side Steps , amp, Running Boards, gt, running Boards, gt, running Boards
SKU: Orp6349264810t
|
|
|
Poison Spyder Diy Short Ricochet Rockers (bare Steel) - Diy-50-020.
The Diy Rico Step Kit From Poison Spyder Allows The Do-it-yourselfer To Add A Heavy-duty Rub Rail And Entry Step To The Stock Jeep Jk Rubicon Rocker Rails, Poison Spyder Rocker Knockers Or Other Aftermarket Plate Steel Rocker Armor. The Components Provided In The Kit Are Similar To Poison Spyders Ricochet Rockers, Hence The Name Of The Kit. The Kit Includes Dom Tube Rub Rails, Rico Steps And End Gussets. The Dom Tube Pieces Are Cnc Bent And Pre-notched, Ready To Weld On. The Rico Steps And Gussets Are Laser Cut From 3/16 Plate Steel. The Steps Are Brake-formed To Provide Extra Strength And Reverse-dimpled For Foot Traction. The Main Tubes Measure 45.25 Long And The Kit Was Designed Specifically For The Tj, Yj And Cj-7, But Might Possibly Be Used On Other Vehicles If It Fits. Requires Welding. Bare Steel;requires Welding;main Tubes Measure 45.25 Inch Long;includes Dom Tube Rub Rails, Rico Steps And End Gussets;cnc Bent And Pre-notched, Ready To Weld On
Manufacturer: Poison Spyder Customs
ID: Diy-50-020
Category: Armor , amp, Protection, gt, rocker Protection, gt, rock Sliders And Guards
SKU: Pscdiy-50-020
|
|
|
Painless Wiring Cj Wiring Harness - 10106.
This Factory Upgrade Uses The Oem Style Fuse Block And Txl High Temperature Wire For Trouble Free Performance. Open Ended Wire Leads Allow For Custom Routing Of Wires. Kit Includes Standard 22 Circuit Features For The Cj-6/cj-7 1975 & On Where The Wires Run Through A Bulkhead And The Ignition Switch Is In The Column. This Kit Includes Gm (column Mounted) Ignition Switch Connectors And A Gm (column Mounted) Turn Signal Switch Connector Pre-terminated And Ready To Install. Also Included Are Pre-wire Plugs For Headlights And The Dimmer Switch. Uses The Factory-style Bulkhead Connector So No Special Brackets Are Required. Universal;includes All Hardware And Instructions
Manufacturer: Painless Wiring
ID: 10106
Category: Electrical, gt, electrical Components, gt, chassis Wire Harness
SKU: Pwp10106
|
|
|
Rightline Gear 4x4 Duffle Bag (60l) - 100j86-b.
Carry Your Gear On Or In Your Vehicle! Load Up Your Rear Cargo Area, Hitch Rack, Roof Top, Cargo Basket, Or Truck Bed With As Many Rightline Gear 4x4 Duffle Bags Because Needed. The Weatherproof Bags Feature A Zippered Pocket, (2) Handles, And A Shoulder Strap. A Hard Plastic Insert In The Bottom Of The Bag Provides Shape And Structure. The Bags Are Made From Tough Pvc Coated Mesh That Is Re-enforced For Strength And Uv Protected. Keep A 4x4 Duffle Bag Packed For Each Of Your Favorite Activities And Be Ready To Roll At A Moment's Notice. Capacity: 60 L;dimensions: 25 L X 11.75 W X 13 H;weatherproof With Welded Seams, Urethane Coated Zippers, And A Hook-&-loop-close Zipper Cover;color: Black;includes: Bag, Shoulder Strap, (2) Attachment Straps, Plastic Insert, And Set Up Guide
Manufacturer: Rightline Gear
ID: 100j86-b
Category: Towing, gt, cargo Management, gt, cargo Carrier
SKU: R/g100j86-b
|
|
|
Rancho Rs7000mt Monotube Shock - Rs7381.
Ranchos Rs7000mt Series Shocks Are A Monotube, High-pressure Gas Charged Shocks That Deliver Maximized Heat Dissipaiton For Less Fade, And Maximum Damping Efficiency For Ride Quality And Control. The Rs7000mt Features Sensitive Damping That Reacts Instantly To A Wide Variety Of Off-road Obstacles That May Come Across Your Path. Other Features Include: Brushed-zinc Clear Coated Finish, 2 Inch Diameter Shock Body, Application Specific Valving, Quality That Far Surpasses Oe Specifications And Made In America. 4 Inch Lift Height
Manufacturer: Rancho
ID: Rs7381
Category: Suspension And Shocks, gt, shock Absorbers
SKU: Ranrs7381
|
|
|
Rugged Ridge Xhd Wheel/tire Package - 15391.13.
Xhd Wheel/tire Package; Incl. 17 In. Xhd Wheel; Silver; 305/65r17 Mickey Thompson Atz P3 Tire; Mounted/balanced; W/tpms Sensor;includes: 1 Tire And 1 Wheel;for A Set Order Quantity 44
Manufacturer: Rugged Ridge
ID: 15391.13
Category: Tires , amp, Wheels, gt, jeep Tire And Wheel Packages
SKU: Rug15391.13
|
|
|
Skid Row Off Road Transfer Case Skid Plate (black) - Jp-5013.
This Rock Rated Transfer Case Skid Plate For Your Awesome Jk Fitts All Models From 2007-2017. It Is Designed To Replace The Factory Skid Plate And Provides Complete Coverage For Your Transfer Case. Our Jk Transfer Case Skid Plates Mount Solidly To The Jeeps Frame Using The Factory Hardware And Are Specially Designed For Easy Bolt-on Installation. No Drilling Is Required For A 100% Completely Bolt-on Installation! This Skid Plate Is Made Of 3/16 Thick Steel That Is Laser Cut And Cnc Folded For Consistent Quality That Sets The Standard For Jeep Skid Plates. They Also Equal Number Into Our Upcoming Gas Tank Skid Plates To Provide Extra Strength And To Create A Smooth Surface .our Skid Plates Are Abrasive-blasted Former To Being Powder Coated To Assure That The Finish Adheres Better Than Our Competitors Coatings. We Use A Semi-gloss Black For An Attractive Finish That's Easy To Touch Up When Necessary. Laser Cut 3/16 Thick Steel;easy, Bolt On Installation - No Drilling;made In The Usa
Manufacturer: Skid Row Off Road
ID: Jp-5013
Category: Armor , amp, Protection, gt, skid Plates
SKU: Sfkjp-5013
|
|
|
Stainless Steel Brakes Big Bite Brake Pads - 1607901.
Application Specific Friction Materials Reduce Noise, Vibration And Harshness, Nitrile-polymer Coated Hardware Prevents Rusting And Brake Pad Chatter. Front;with Teves Caliper;high Performance Brake Pads
Manufacturer: Stainless Steel Brakes
ID: 1607901
Category: Brakes , amp, Steering, gt, disc Brake Pads
SKU: Ssb1607901
|
|
|
Teraflex 4 Inch Elite Lcg Long Flexarm Lift Kit - Right Hand Drive - 1457462.
The Advantage And Benefit Of The Teraflex Jk 4 Elite Lcg Suspension System For Jk Wranglers Is Apparent The Minute You Put The Pedal To The Floor. With Superior Handling, Responsive Steering, Ultimate Off-road Performance, And Customizable Suspension Geometry, This System Is Miles Ahead Of Anything Else Out There. Teraflex Continues To Dominate The Off-road Market, And The Elite Lcg Reinforces That Position. The Elite Lcg Suspension Can Handle Anything You Can Dish Out. The Elite Lcg Suspension System Is The Perfect Solution For Aggressive Trail Users Looking For The Most Advanced Long Flexarm System Available With A Lift Height That Keeps The Center Of Gravity As Low As Possible. The Elite Lcg Features Adjustable Suspension Tuning, And Is Accomplished Through Fully Adjustable Upper And Lower Long Flexarms That Allow Pinion, Caster, Anti-squat, And Tire Position Configurations To Be Modified. This Kit Includes 4l Ift Coil Springs, Weld-on Long Arm Bracketry, Long Adjustable Flexarms, Front Adjustable Monster Trackbar, Front Swaybar Disconnects, Rear Swaybar Links, Rear Trackbar Bracket, Bumpstops And All Necessary Hardware. This Suspension Sysrem Is Designed To Fit Up To 37 Inch Tires (aftermarket Wheels With 4.5 Inch Backspacing Or Less Is Required). Fits All Right Hand Drive Jk Wrangler Models Including Rubicon. Note: Cutting & Removal Of Factory Bracketry And Welding Is Required For Installation Of This Kit. Driveshaft Modifications Are Recommended With This Suspension System. 2012+ Jks Require Exhaust Spacers (#2610000) Or Other Exhaust Modification For Proper Driveshaft Clearance. 2-door Models;right Hand Drive Models;shocks Not Included;2 Inch Od X .281 Wall Dom Tube:includes 4 Inch Lift Coil Springs, Weld-on Long Arm Bracketry, Long Adjustable Flexarms And Front Adjustable Monster Trackbar;also Includes Front Swaybar Disconnects, Rear Swaybar Links, Rear Trackbar Bracket, Front And Rear Brake Lines, Bumpstops And All Necessary Hardware;aftermarket Wheels With 4.5 Inch Backspacing Or Less Is Required;max Tire Size: 35 Inch
Manufacturer: Teraflex
ID: 1457462
Category: Suspension And Shocks, gt, suspension Lift Kits
SKU: Ter1457462
|
|
|
Westin Signature Series Wheel To Wheel Length Round Step Bars (black) - 25-2855.
Signature Bars Are The First Bar Style Step Westin Manufactured And Introduced To Market. Offering The First Of Their Kind, And The First To Do It Right, Westin Revolutionized The Round Bar Style Step Industry With A Masterfully Designed Recessed Step Area That Maximized Their Integrity. Westin Set The Industry Standard And Instantly Doubled This Step Bars Value - Providing Great Looks And Superior Function. Signature Bars Come With A 3 Year Warranty Against Rust And Corrosion. 4-door Models;black;recessed Step Area;3 Inch Tube;galvanized Mild Steel;3-year Warranty;sold As A Pair
Manufacturer: Westin
ID: 25-2855
Category: Side Steps , amp, Running Boards, gt, nerf Bars , amp, Steps, gt, step Nerf Bar
SKU: Wes25-2855
|
|
|