|
|
Auto Meter Sport-comp Mechanical Boost/vacuum Gauge - 3401.
The Standard In The Industry, Auto Meters Mechanical Boost/vac Gauges Have Found Their Way Into More Builds Than Any Other. Using A Patented, High Precision Bourdon Tube Meter Movement, There Is Not Another Gauge On The Market That Can Lay Claim To The Levels Of Accuracy Or Durability You Will Find Here. A Simple 1/8 Inch Npt Pressure Connection Requires No Electrical Hookup For Operation. Includes 1/8 Inch Npt Fittings And Nylon Line Kit. Mechanical Boost/vacuum Gauge;incl. 6 Ft. Tubing;t-fitting
Manufacturer: Auto Meter
ID: 3401
Category: Performance Parts, gt, gauges, gt, gauge Set
SKU: Amg3401
|
|
|
Auto Meter Phantom Ii Electric Voltmeter Gauge - 7592.
Auto Meters Phantom Ii Of Gauges Feature A Unique Twist On The Phantom Design With Its Bright White Dial Featuring Unique Outlined Block Letters With A Led Back Lighting Feature And Glowing Red Needle. Electric Voltmeter Gauge;8 - 18 Volts
Manufacturer: Auto Meter
ID: 7592
Category: Performance Parts, gt, gauges, gt, voltmeter Gauge
SKU: Amg7592
|
|
|
Blue Torch Fabworks Sport Cage Kit - 1011.
The Blue Torch Fabworks Tj Front Sport Cage Kit Provides An Easy And Affordable Way To Add A Sport Roll Cage To Your Jeep. This D.i.y. Kit Is All .120 Wall Dom Tubing That Comes Pre-notched For Quick Assembly. We Utilize Our Btf Tj Dash Tie-ins To Avoid The Need To Drill Through The Dash, As Well As Still Allowing For Plenty Of Leg Room. The Kit Uses The Factory Jeep Tj Door Surrounds And Works With Factory Soft And Hard Tops. (some Drilling Required For Door Surrounds) Includes: (2) Btf Tj Dash Tie-ins, (2) Windshield Mounting Plates, (2) Windshield Spreader Bars, (2) Center Spreader Bars, (1) A-pillar Cross Bar, (1) Dash Bar. 8-piece Kit;manufactured From .120 Wall Dom;welding Required For Installation;bare Steel;works With All Soft Goods, Factory And Aftermarket Tops
Manufacturer: Blue Torch Fabworks
ID: 01011
Category: Performance Parts, gt, fittings, Lines , amp, Hardware, gt, tube Fitting
SKU: Btf01011
|
|
|
Crown Automotive Backing Plate Set - Cro476212829k.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. Dana 35 With Disc Brakes;dana 35 Backing Plate Assembly Kit
Manufacturer: Crown Automotive
ID: 476212829k
Category: Replacement Brakes, Steering And Suspension Parts, gt, replacement Brake Parts, gt, zj Grand Cherokee Brake Parts
SKU: Cro476212829k
|
|
|
Crown Automotive Dana 30 Kj Front 27 Spline Passenger Side Axle Shaft - 52111778ab.
For Over 50 Years, Crown Automotive Has Been The Leading Manufacturer And Distributor Of Replacement Parts For Jeep Vehicles. With Over 8,000 Different Part Numbers, Including Many Factory-discontinued Items, We Offer You Exceptional Quality That Is Only Matched By An Exceptional Warranty. With 3.7l Engine;front Right Side;25-1/4 Inch Long;dana 30 Front Axle Shaft
Manufacturer: Crown Automotive
ID: 52111778ab
Category: Drivetrain , amp, Differential, gt, axle Shaft
SKU: Cro52111778ab
|
|
|
Currie Johnny Joint Adjustable Front Trac Bar - Ce-9120tjs.
This Component Replaces The Stock Xj/tj/lj/mj Front Track Bar With An Adjustable Length Johnny Joint Unit. This Is Designed To Center The Front Axle Assembly Under The Vehicle After Installation Of A Aid Kit And/or The Springs Settle. It Is Made From 1 1/4 Heavy Wall D.o.m. Tubing And It Uses A 5/8 Bolt At The Frame End For Added Strength, Drilling Equipment Is Obviously Required For Instlalation. Housing End Retains The Factory Bolt. Sold Each. Black Powdercoated;jeepspeed 5/8 Inch Track Bar Bolt;made From 1-1/4 Inch .250 Heavy Wall Dom Tubing;uses 2-1/2 Inch Johnny Joint;grade 8 Hardware
Manufacturer: Currie
ID: Ce-9120tjs
Category: Suspension And Shocks, gt, suspension Components, gt, suspension Track Bar
SKU: Curce-9120tjs
|
|
|
Grant Steering Wheels F/x Splash Steering Wheel - 895.
Adapter Required For Installation. Universal Application;non Air Bag Models;high Gloss Silver Grip;polished Aluminum Spokes;13-1/2 Inch Diameter, 3-1/2 Inch Dish
Manufacturer: Grant Steering Wheels
ID: 895
Category: Interior, gt, steering Wheels, gt, steering Wheels
SKU: Gra895
|
|
|
Garvin Industries Expedition Rack Ladder - 29611.
Our Expedition Rack Ladder Is A Great Way To Help Load All Your Gear In The Jk Expedition Rack. Easily Bolts On To Expedition Rack With No Drilling Required. Made Form 3/4 Square Steel Tubing To Match The Expedition Rack. It Will Only Work On The Passenger Side Rear. 2 And 4-door Models;black Texture Powder Coat;passenger Side;easy Access To Expedition Rack;made From 3/4 Inch Square Tubing;made In The U.s.a
Manufacturer: Garvin Industries
ID: 29611
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, racks, gt, vehicle-mounted Ladder
SKU: Grv29611
|
|
|
Kc Hilites 8 Inch Rally 800 Long Range Single Light - 1801.
Kcs Rally 800 Series Lights Are The Next Generation In High Performance Lighting! They Feature Rugged, All Stainless Steel 8 Inch Round Housings With Sturdy, Oversize Mounting Flanges And Virtually Unbreakable Hard Coaated Lexan Lenses. The Slim Profile And Full Pivoting Base Allows For A Wide Range Of Adjustability And Mounting Options. 23 Year Limited Warranty, Does Not Cover Bulbs. 130 Watt Halogen;black Powdercoated Stainless Steel 8 Inch Housing;includes: Matching Abs Stone Guard
Manufacturer: Kc Hilites
ID: 1801
Category: Lighting , amp, Lighting Accessories, gt, off-road Lighting
SKU: K/c1801
|
|
|
Lund Trailrunner Running Boards (diamond Plate) - 261220.
Rugged Diamond Plate Aluminum Design, Wide Step Area For Sure Footing, Molded End Caps W/adjustable Design, Custom Fit Appearance, Custom Fit Mounting Kits For Each Application Diamond Plate Aluminum;requires Running Board Mount Kit Pn Lii300009 Or Pn Lii310009;sold As A Pair
Manufacturer: Lund
ID: 261220
Category: Side Steps , amp, Running Boards, gt, running Boards, gt, running Boards
SKU: Lii261220
|
|
|
Omix-ada Steel Replacement Rear Portion Of Side Panel - 12009.13.
This Item Is Shipped Via Truck Freight For $125.00. Driver Side;steel Replacement Rear Portion Of Side Panel
Manufacturer: Omix-ada
ID: 12009.13
Category: Armor , amp, Protection, gt, jeep Body Protection, gt, quarter Panel Guards
SKU: Oai12009.13
|
|
|
Omix-ada Dana 44 Differential Carrier - 16505.37.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. Dana 44;rear;hydra-lok;abs;fits Models Built After 3/29/00
Manufacturer: Omix-ada
ID: 16505.37
Category: Replacement Drivetrain Parts, gt, replacement Axle Parts, gt, wj Grand Cherokee Model 35 Rear Axle
SKU: Oai16505.37
|
|
|
Omix-ada Replacement 1 Core Radiator For 4.0l 6 Cylinder Engine With Automatic Transmission - 17101.22.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 4.0l 6 Cylinder Engines;standard Duty;1 Core;automatic Or Manual Transmission;direct Replacemen 1 Core Radiator For 4.0l 6 Cylinder Engine With Automatic Transmission
Manufacturer: Omix-ada
ID: 17101.22
Category: , gt, gt, wk2 Grand Cherokee Cooling Parts
SKU: Oai17101.22
|
|
|
Omix-ada Alternator (natural) - 17225.21.
Direct Oe Replacement Jeep Parts And Accessories Built To The Originaal Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 81 Amps;serpentine Belt Pulley Included
Manufacturer: Omix-ada
ID: 17225.21
Category: Replacement Under Hood Parts, gt, replacement Electrical Parts, gt, tj Wrangler Electrical
SKU: Oai17225.21
|
|
|
Omix-ada Flex Plate - 16913.12.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Ear Manufacturers Warranty. For 2.8l Engine
Manufacturer: Omix-ada
ID: 16913.12
Category: Replacement Under Hood Parts, gt, replacement Engine Parts, gt, xj Cherokee 4, 0l 6 Cylinder Engine
SKU: Oai16913.12
|
|
|
Omix-ada Alternator (natural) - 17225.18.
Direct Oe Replacement Jeep Parts And Accessories Built To The Original Specifications By Omix-ada. Limited Five Year Manufacturers Warranty. 2 And 4-door Models;160 Amp;6 Groove
Manufacturer: Omix-ada
ID: 17225.18
Category: Replacement Under Hood Parts, gt, replacement Electrical Parts, gt, vintage And Cj Electrical
SKU: Oai17225.18
|
|
|
Road Armor Front Stealth Winch Bumper Square Light Port In Raw Steel (bare) - 512r0z.
Recessed Light Pods For Square Dually/d2 Series Lights, Center Light Mount For 20 Light Bar, Fully Welded Top Plate, Fully Welded Front And Back Shackle Mounts Standard, Faceted 3/16 Outer Shell, 1/4-inch-thick Internal Mounting Brackets And Gussets, All Guard Tubing Is .120-wall, Combat Proven And Trusted By The United States Military, Life Allotted Period Guarantee Against Breakage. Front Stealth Bumper;square Light Mounts;bare Steel;lights Not Included;made In The U.s.a
Manufacturer: Road Armor
ID: 512r0z
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: R/a512r0z
|
|
|
Road Armor Front Stealth Non-winch Illuminator Bumper Titan Ii Square Light Port In Raw Steel (bare) - 407r2z-nw.
Dodge Ram Front Bumper, Non Winch 2006-2008 Ram 1500, Unfinished Raw Steel, Square Light Ports Titan Ii Guard - Illuminator. Road Armor Stealth Series. Recessed Light Pods For Square Dually/d2 Series Lights, Center Light Mount For 20 Light Bar, Fully Welded Top Plate, Fully Welded Front And Back Shackle Mounts Standard, Faceted 3/16 Outer Shell, 1/4-inch-thick Internal Mounting Brackets And Gussets, All Guard Tubing Is .120-wall, Combat Proven And Trusted By The United States Military, Life Time Guarantee Against Breakage. Front Stealth Bumper;w/o Winch Mount;titan Ii Brush Guard;square Lights Mounts;bar E Steel;proudly Made In Texas, U.s.a.;hot Rolled And Laser Cut 3/16 Inch Plate Steel;lights Are Not Included
Manufacturer: Road Armor
ID: 407r2z-nw
Category: Bumpers, Tire Carriers , amp, Winch Mounts, gt, front Bumpers
SKU: R/a407r2z-nw
|
|
|
Rigid Industries E-series 40 Inch Combo Led Light Bar - 14231.
The Original Led Light Bar - The Rigid Industries E-series Was The First Projected Led Light Bar. Since Its Introduction In 2006, The E-series Light Bar Has Set The Standard In The Industry Through Continuing Advances In Technology And Superior Engineering. Available In A Wide Range Of Lengths And Configurations, Our Flagship Is The Light Bar Of Choice For Everything From Light Truck / Car Applications And Vehicle Race Teams To Farming Equipment And Police / Fire Rescue Vehicles. The E-series Light Bar Is Designed To Project Light At Extreme Distances While Consuming Very Little Power. It Features An Extruded Aluminum Housing And Polycarbonate Lens That Is Sealed Against The Elements To Provide Years Of Trouble-free Operation. E-series;led Light Bar;specter - Hyperspot/driving;242 Watts
Manufacturer: Rigid Industries
ID: 14231
Category: Lighting , amp, Lighting Accessories, gt, off-road Lighting
SKU: Rig14231
|
|
|
Rugged Ridge All Terrain Floor Liner, Rear (gray) - 14950.2.
Lifetime Warranty - Rugged Ridge Floor Liners Are Guaranteed To Pass To Windward Of The Elements And Climate. Other Manufacturers May Only Carry A 3, 5 Or 10 Year Warranty. Thermoplastic Material - Rugged Ridge Floor Liners Are Made Of High Pressure Injection Molded Oe-quality Thermoplastic That Looks And Feels Like Rubber, But Provides A Nonslip Surface. They Will Not Fade In The Sun & Our Proprietary Material Is Resistant To Oil, Gas And Battery Acid. Nibbed And Floor Hook - Rugged Rigde Floor Liners Take Advantage Of Factory Floor Hooks And Have Nibs On The Back Of The Liners Help Keep The Liner In Place. Raised Lip And Retaining Edges - Spills Ultimately Will Happen And Your Feet Drag Dirt, Mud, Snow Or Water Into Your Vehicle. Without A Way To Contain The Spills Or Corosive Material Your Shoes Pick Up The Mess Makes It To The Door Sill And Eventually The Carpet. Rugged Ridge Floor Liners Have A Raised Lip Retainign Edges Around Their Perimeter Of Your Floor Board To Keep The Spills And Mess Off Your Vehicles Carpet. Carpet Floor Mats Offer Very Little To No Protection. Custom Fit With Good Looks Rugged Ridge Floor Liners Deep Tread Technology With Chevron Shaped Pattern Are Custom Fitted For Your Vehicle. They Are Designed To Compliment Your Vehicle And Are Available In Black, Grey And Tan To Match Almost Any Vehicle Interior. Front & Second Seat Liners Are Made With Consistent Thickness This Means Strong Protection For The High-traffic Areas Of Your Vehicle.easy To Remove And Clean. Simply Hose Them Off And Go! All Terrain;floor Liner;rear;gray;all Weather Construction;oe Quality Thermoplastic Elastomer;molded Chevron Shape Tread Pattern;raised Nibs On The Bottom Keeps Liner In Position;sold As A Pair
Manufacturer: Rugged Ridge
ID: 14950.20
Category: Interior, gt, floor Mats , amp, Cargo Liners, gt, floor Mats
SKU: Rug14950.20
|
|
|
Spiderwebshade Rear Shadeskins - Skn-rgjk-bck-tan.
Spiderwebshade Shadeskins Are Now Available And Specifically Designed For Rancho Rock Gear Tube Doors. Shadeskins Are Made Using Our Signature Heavy-duty Trailmesh Material Designed To Meet The Needs Of The Most Aggressive Off-road Enthusiast. Shadeskins Help Keep Mud And Branches Out Of The Vehicle While Still Allowing Air To Flow Through. Shadeskins Are Available In 10 Vibrant Colors To Help You Continue Customizing Your Jeep. Fits 2007 To 2017 Jk Honor Man Unlimited And Rubicon Unlimited;4-door Models;tan;fits Rancho Rock Gear Tube Doors;rear Doors;mounting Hardware Included;no Drilling Required;sold As A Pair
Manufacturer: Spiderwebshade
ID: Skn-rgjk-bck-tan
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, doors , amp, Door Accessories, gt, door Netting
SKU: Swsskn-rgjk-bck-tan
|
|
|
Tuffy Security Glove Box (slate) - 149-08.
This 16-gauge Steel, High Security Glove Box Is An Ideal Replacement For The Plastic Factory Glove Box. The Glove Box Can Be Used To Secure A Number Of Smaller Items. Tuffys Patented Latch Order Allows The Glove Box To Be Latched Shut Without Having To Be Locked And Unlocked Each Time It Is Accessed. Exterior Dimensions: 11-5/8 Inch W X 9-7/16 Inch D X 11-1/8 Inch H. Interior Dimensions: 9 Inch W X 9-1/4 Inch D X 6-3/8 Inch H. 2 And 4-door Models;dark Slate;two-point Welded 1/2 Inch Solid Steel Striker;patented Pry-guard Ii Locking System With A 1/4 Inch Steel Latch;patented Anti-twist Push Button Lock System With A 14 Tumbler Double Bitted Security Key
Manufacturer: Tuffy
ID: 149-08
Category: Interior, gt, storage , amp, Organizers, gt, glove Box
SKU: Tfy149-08
|
|
|
Tomken Machine Skid Plate (black) - Tms-1213-c.
Tomkens Skid Plates Protect Vital Components Like Gas Tanks, Transfer Cases, U-bolts, Transmissions, Or Your Entire Under Carriage, From Damage While Off-roading, Allowing You To Concentrate More On Having Fun And Not Worrying About Damaging Your Vehicle Black Powder Coat;bolt On;for Use With 3 Inch Lifts Minimum
Manufacturer: Tomken Machine
ID: Tms-1213-c
Category: Armor , amp, Protection, gt, skid Plates
SKU: Tomtms-1213-c
|
|
|
Bartact Rear Bench Seat Cover (black/red) - Tjsc0306rbbr.
Unlike Any Others On The Market, Bartact Keeps Their Military Production Background In Mind. All Of Our Seat Covers Are Not Only Built To Last With The Highest Grade Waterproof-backed Polyester, But They Also Have A Unique Storage Design Implemented. They Are 100% Made In The U.s.a. Another Benefit Of Our Seat Covers Is The Fit And Feel. Unlike Many Others, Because Of Bartacts Eexpertise Derived From Military Background, They Are Able To Create The Most Near-perfect Fit Designed To Look And Feel Like A Re-upholstered Seat. Finally, While Others May Offer A One Year Anti-fade Material, Bartact Seat Covers Are Guaranteed Not To Fade For 3 Years Minimum. *photo Used For Illustration Purposes Only. Tj Rear Seats Do Not Have Headrests. Black/red;made From Waterproof Backed Polyester;includes One 16in X 8in Storage Bag;full Zippered Storage Pockets In The Front And Rear Of Cover;slip On Installation;made In The U.s.a
Manufacturer: Bartact
ID: Tjsc0306rbbr
Category: Interior, gt, jeep Seat Covers
SKU: Trktjsc0306rbbr
|
|
|
Warrior Universal Platform Rack Mounts - 10824.
Currently Available In 2 Inch And 4 Inch Tall Models So That You Can Choose The Best Height For Your Application. These Universal Mounts Affix The Popular Warrior Products Platform Roof Rack To Hard Tops, Vehicle Roofs, Canopies, Trailer Surfaces, And More. Mounts Platform Rack To Any Flat Surface;set Of 4;allows The Platform Rack System To Maintain A Level Surface, Even When The Mounts Are Affixed On A Curved/angled Roof;made In The U.s.a
Manufacturer: Warrior
ID: 10824
Category: Exterior Parts , amp, Car Care , Fender Flares, gt, racks, gt, roof Rack Mount Kit
SKU: W/i10824
|
|
|