|
|
Brano 4243 Calorproof Molleton 2 Gauntlet Size 10.
2259e94000heat Protective Cow Split Leather Gauntlet. 100% Cotton Fleece Liner Increasing Thermal Insulation. Offers Excellent Resistance To Flame And Projection Of Small Incandescent Particles. Good Resistance To Cuts And Puncture. Allows Contact Up To 100ã‚â°c. To En420, En388, En407 And En12477.size: 10.
Manufacturer: Brano
ID: Calorproof Molleton 2
Category: Personal Protection , amp, Clothing , gt, Hand , amp, Arm Protection , gt, Gloves , gt, Heat Protection Gloves
SKU: Ctl9612140n
|
|
|
Sherwood 4mmx63mm O/a Hss-cobalt 4 Fl Pl/sh End Mill.
Long Series.centre Cutting, Used For Profile Milling, Milling Keyways And Producing Open Slots. Bright Finish. Flute Type: 30ã‚â° Helix. Overall Dimensions To Din 844. Plain Shank To Din 1835a.metric Tolerances:nominal Dia.: Up To 38mm. Limits Of Tolerance: +0.0630, -0.0130.nominal Dia.: Above 38mm. Limits Of Tolerance: +0.1250, -0.0000.
Manufacturer: Sherwood
ID: Crshr0613875c
Category: Cutting Tools , gt, Milling , gt, End Mills , gt, Hss-co, End Mills - Long Series
SKU: Shr0613875c
|
|
|
Kemet Mfp1403p 31x3x150mm Grit 400 Mfp Gesswein Stone.
Gesswein Mfp Hard Silicon Carbidethis Is A Tough Fast Cutting Stone. Length: 150mm.manufactured From Carefully Graded Abrasive Particles, Mixed With The Appropriate Bonding Agents And Fired In Electric Or Gas Ovens To Produce A Stone Suitable For Roughing Out Cavities And Dies To Commercial Finishes.
Manufacturer: Kemet
ID: 311172
Category: Abrasives , gt, Finishing , amp, Polishing , gt, Oilstones , amp, Whetstones
SKU: Kem2552631y
|
|
|
Kennedy Set Of 19 Hss-cobalt S/s Drills 1-10mm X 0.50mm.
19 Piece Metric: 1.0-10.0mm X 0.5mmheavy Duty Drill Made Of 5% Cobalt Material With Excellent Heat Resistance. To Drill Steels With Tensile Strength Up To 1,400 N/mm2, Very Hard Bronze, Stainless Steels As Well As Heat And Acid Resistant Steels. Point Angle: 135ã‚â°. Helix Angle: Normal. Web Thickness: Strengthened. Relief Angle: Normal. Tolerance Of Diameter: H8. Tolerance Of Shank: F11. Supply Unit. All Diameters - 1 Pce. Manufacturing Standard: Bs 328, Din 338b.
Manufacturer: Kennedy
ID: Crken0268460k
Category: Cutting Tools , gt, Hole Making , gt, Drill Sets , gt, Ground Flute Jobbers
SKU: Ken0268460k
|
|
|
Kobe Red Line Sm203-41 Nibbler Die Nb16 0.
Downstrokeproduce Burr Free Cuts Without Distortion. Ideal For Body Shop And Sheet Metal Work. Suitable For Use With Kobe Nb160 High Performance Nibbler. Kbe-280 Parts Cut On Downstroke.
Manufacturer: Kobe Red Line
ID: Sm203-41
Category: Power Tools , gt, Air Tool Accessories , gt, Air Tool Spares
SKU: Kbe2800028a
|
|
|
Renold 06b-1 Bs Chain Din8187 Blue Box 110038 25ft.
Simplex Chainrenold Blue Box Chain With Its Unique Control Over Pin/bush Contact, Ensures That Little Initial Chain Adjustment Is Therefore Required. Renold Blue Box Roller Chain Is Highly Fatigue Resistant With Breaking Loads That Exceed The Minimum Requirements Of The International Standards. The Specification Of Renold Chain Has Evolved From Decades Of Design, Test And Application Experience Which Delivers Product Reliability And Consistency. Other Sizes From 5/16" To 2" Pitch Are Also Available Please Ask For Details.conforms To: Din8187/is606
Manufacturer: Renold
ID: 06b1
Category: Bearings , amp, Transmissions , gt, Roller Chains , gt, Simplex Chain
SKU: Ren6901001f
|
|
|
Kennedy 2.5-tonne Low Profile Trolley Jack.
Low Profile Trolley Jacks Have Strong, Robust Steel Chassis To Provide Stability When Under Load. A Low Entry Height. Heavy Duty Fixed Direction Casters And Swivel Castors Ensure Easy Positioning Under The Vehicle Prior To Lifting. The Pump Handle With Comfort Rubber Grip Is To Rapidly Raise And Lower The Load Arm And The Vehicle. For Use On Firm Level Surfaces. Do Not Work Under The Raised Vehicle Until Another Means Of Support, Such As Axle Stands Are In Place.
Manufacturer: Kennedy
ID: T830018
Category: Automotive , gt, Tools , gt, Workshop , amp, Roadside Assistance , gt, Jacks , amp, Stands
SKU: Ken5036530k
|
|
|
Kennedy 1/4"-1" Solid Centre Auger Bits (set-7).
American Pattern With Solid Single Twist, Precision Machined For Perfect Concentricity Manufacrtured From Hardened Carbon Steel, The Flute Is Ground And Honed To Cut Along Its Entire Length. Spur Point Ensures Accurate Location At The Start Of Drilling. Hexagon Shank For Use With Hand And Power Tools.boxed Setcontents: 1x Each 6 (1/4"), 9 (3/8"), 13 (1/2"), 16 (5/8"), 19 (3/4"),22 (7/8") And 25mm (1").
Manufacturer: Kennedy
ID: Crken5973300k
Category: Hand Tools , gt, Carpenters , amp, Joiners , gt, Auger, Forstner , amp, Flat Bits
SKU: Ken5973300k
|
|
|
Senator 160mm Combination Pliers.
Heavy-duty Standard Manufactured From Chrome Vanadium Steel With A Satin Finish. Serrated Jaws For Gripping Nuts, Bolts, Studs Etc. Side Cutting For Wire Up To 1.6mm Diameter. Also With Serrated Gripping And Crimping Jaws Behind The Head.
Manufacturer: Senator
ID: Crsen5584560k
Category: Hand Tools , gt, Pliers , amp, Grips , gt, Combination , amp, Linemans
SKU: Sen5584560k
|
|
|
Moldex 5174 (m/l) Disp Gas/vapou R Pre-assembled Half Mask.
The 5000 Series Half Masks Have Integral Gas Filters, Making The Mask Disposable And Exempt From The Maintenance Requirements Of Coshh If Disposed Of Within One Month Or When Breakthrough Occurs (whichever Comes First). Improved Clogging Characteristics Enable Particulate Filters To Pass The Dolomite Clogging Test (d). When Particulate Filters Get Clogged They Can Be Replaced For Prolonged Use Of The Mask. See Below For Replacements Particulate Filters.
Manufacturer: Moldex
ID: 5174
Category: Personal Protection , amp, Clothing , gt, Respiratory Protection , gt, Respirators - Reusable Masks
SKU: Mdf9592074m
|
|
|
Loctite 7200 Chisel Cleaner 400ml Spray.
Softens Cured Gasket Sealants And Traditional Gaskets. Lifts Carbon And Removes Burnt Oil. Minimal Scraping Required.size: 400ml.
Manufacturer: Loctite
ID: 235323
Category: Lubricants , amp, Chemicals , gt, Industrial Cleaners , amp, Solvents
SKU: Loc7255702x
|
|
|
Medikit Alcohol-free Wipes (box-100) Moist 14x14cm.
For Wound Cleansing And Pre-dressing Preparation Ensures Greater Adhesion For Dressings. The Alcohol-free Solution Soothes Cuts And Grazes And Prepares The Area Surrounding The Wound Or Graze For Dressing. Once Prepared The Area Will Ensure The Dressing Will Adhere Well To The Skin. Individual Sachets.
Manufacturer: Medikit
ID: 82124
Category: Site Safety , gt, First Aid , gt, First Aid Accessories
SKU: Med9962140k
|
|
|
Loctite 7070 Solvent Cleaner 400m L Aerosol.
General Purpose Solvent-based Cleaner For Metals. Also For Most Plastics Nsf Food Approved.size: 400ml And 10ltr.
Manufacturer: Loctite
ID: 88432
Category: Lubricants , amp, Chemicals , gt, Industrial Cleaners , amp, Solvents
SKU: Loc7256006m
|
|
|
Kennedy Suede Leather 2-pocket 1- Loop Nail Pouch.
Leather, Two Pockets, One Loop, Deep Pocket. Double Stitched Seams With Rivetted Corners For Extra Strength.
Manufacturer: Kennedy
ID: Np2d
Category: Storage , amp, Handling , gt, Storage , gt, Tool Storage , gt, Tool Belts, Pouches , amp, Rolls
SKU: Ken5933340k
|
|
|
Offis Mobile Magnetic Drywipe Board Alu. Stand 1500x1200.
Stylish And Modern Aluminium-framed Mobile Whiteboard To Complement All Conference And Meeting Rooms. Magnetic Surface. Whiteboard Is Suspended On A Horizontal Pivot And Mobility Is Provided By Four Leg Castors. Complete With Pen Tray.
Manufacturer: Offis
ID: Uni1744cw
Category: Office Supplies , amp, Stationery , gt, Conference , amp, Presentation , gt, Notice Boards , amp, Whiteboards
SKU: Ofi8360370k
|
|
|
Office Basics Ob Hp Compatible Black Toner Cartridge 92298a.
Welcome To Office Basics. A Range Of Compatible, Replacement Inkjet & Laser Toner Cartridges For A Wide Range Of Inkjet And Laser Printers. Every Product Is Manufactured To The Highest Possible Standard, At A Fraction Of The Price!
Manufacturer: Office Basics
ID: Ob00150
Category: Computers, Televisions , amp, Accessories , gt, Printer Cartridges
SKU: Obc8391450k
|
|
|
3m Sj3550 Dualock 25mmx45.70 M.
3m Dual Lock Reclosable Fastening Products Are Up To 12 Times Stronger Than Other Reclosable Fasteners. They Can Be Open And Closed Hundreds Of Times With No Seal Degradation Making Them Ideal For Use In;
ID: 7000001982
Category: Adhesives , amp, Sealants , gt, Adhesive Tapes , gt, Foil Tapes
SKU: Mmm9829780k
|
|
|
Stabilo All 8052 White Chinagraph Pencil (pk-12).
For Artists And Professional Users. Coloured And Graphite Pencil For Almost All Surfaces. Writes Brilliantly On Glass, Plastic, Metal. Available In Graphite, Red, Yellow, Black And White Aquarellable Colours. Packs Of 12. Leads Made From The Highest-quality Pigments And Finest Graphite. Lead Quality And Strong Colors Guarantee Highest Customer Satisfaction.
Manufacturer: Stabilo
ID: 36797
Category: Office Supplies , amp, Stationery , gt, Writing , amp, Graphic Supplies , gt, Pencils
SKU: Sto8460180k
|
|
|
Ambersil Brake Cleaner 5ltr.
A Non-chlorinated Solvent Blend, Formulated To Quickly And Safely Remove Brake Fluid, Grease, Oil And Other Contaminants From Brake And Clutch Parts. Helps Brakes Last Longer And Perform Better. Reduces Disc-brake Squeal And Clutch Chatter. Can Be Applied Without Disassembly. Saves Time And Reduces Maintenance Costs. Evaporates Quickly And Leaves No Residue. Stable, Non-staining And Non-corrosive To Metals. Safe On Most Plastics, Coatings And Rubbers (test Prior To Use). Fitted With A 360ã‚â° Spray System For All Angle Use, Even Upside Down.size: 500ml And 5ltr.
Manufacturer: Ambersil
ID: 31772
Category: Lubricants , amp, Chemicals , gt, Industrial Cleaners , amp, Solvents
SKU: Amb7010491m
|
|
|
Allied Machine And Engineering 4c10h-13.5 13.50mm Am200coat Insert.
T-a K35 Carbideam200 Coatedavailable In Tin, Ticn And Tiain As Non Stocked Standards
Manufacturer: Allied Machine And Engineering
ID: 4c10h-13.5
Category: Cutting Tools , gt, Hole Making , gt, Replaceable Tip Drills , gt, Ta Inserted Tip Drill Inserts
SKU: Ame1561218a
|
|
|
Sandvik 150mm (6") Square Second Engineers File.
For Filing Grooves, Rectangular Holes, Inside Corners And For Fine-adjustment Of Cutting Tools.shape: Surfaces Tapered Towards The Tip.double Cut
Manufacturer: Sandvik
ID: 1-160-06-2-0
Category: Abrasives , gt, Filing , gt, Files , amp, Rasps , gt, Engineers Files
SKU: Snk0302420s
|
|
|
Quantum 2500 10" Round White Radiocontrolled Clock.
White Moulded Case With Shatterproof Front Lens. Clear 12 Hour Full Figure Dial. Radio Controlled Movement With Alkaline Aa Battery, Offering 100% Timekeeping Accuracy And Automatic Summer/winter Time Changes.
ID: 2500 Q - Rc
Category: Office Supplies , amp, Stationery , gt, Office Essentials , gt, Clocks
SKU: Ets8020060k
|
|
|
Gates 12g12fbsporx90 Megacrimp One Piece Coupling.
Female Bsp, O-ring Swivel, 60ã‚â° Cone, 90ã‚â° Swept Elbow Type Fbsporx90. Drop Dimensions Meet Iso 12151-6.a Range Of Couplings Covering A Huge Range Of Styles And Terminations. Patented C' Insert Ensures An Evenly Distributed Crimp. Not All Parts Are Listed. For All Your Individual Requirements Please Contact Your Local Branch.
Manufacturer: Gates
ID: 7100-19680-5
Category: Fluid Power , gt, Hydraulic Hose Connections , gt, Hydraulic Hose End Fittings
SKU: Gts2974116f
|
|
|
Sioen 4964 Flexothane Montreal Coverall Green Large.
180gsm Flexothane Classic 100% Polyamide Knitting With Pu Coating. Supple And Stretchable, Windproof And Is 100% Water Resistant. Elasticated Wind Cuffs In Sleeves. Straight Collar With Foldaway Hood. Zip Closure Under Double Flap With Press Studs. Elasticated Waist In The Back. Sleeve And Ankle Narrowing By Press Studs.
Manufacturer: Sioen
ID: 4964
Category: Personal Protection , amp, Clothing , gt, Clothing , amp, Workwear , gt, Overalls , amp, Body Suits
SKU: Ctl9624275c
|
|
|
Iscar Ec-h4xl 20-40/75c20cfr1.0ic900 End Mill.
Ec-h4xl-cfr (relieved Neck): 4 Flute Long Endmills With Different Helix (35ã‚â° & 37ã‚â°) And Variable Pitch For Chatter Dampening With Relieved Necks. Used For Very High Material Removal Rates Roughing And Finishing Operations. Full Slot Milling-up To 2xd.grade: Ic900iso Range - P/m/k: (p15-p40)(m20-m30)(k05-k25)iso Range - H/s/n: (h10-h25)(s15-s25)grade Or Coating Type: Pvdcoating Layers: Tialn
Manufacturer: Iscar
ID: 5623021
Category: Cutting Tools , gt, Milling , gt, End Mills , gt, Hss-co, End Mills - Regular Series
SKU: Isc1324786m
|
|
|